Home / Support / Knowledge Base Articles / Embedded Dev kits Articles

Embedded Dev kits Knowledge Base Articles

How to find firmware for your product
The firmware for your Digi product can be found on the Digi website. The steps required to find and download your firmware are defined below.Navigate to the support site on digi.com.Enter the name ...
https://www.digi.com/support/knowledge-base/how-to-find-firmware-for-your-product
Dec 12, 2023
Does CC8M Nano support Dualboot+Trustfence (Yocto)?
Yes, it’s supported.Dualboot is a partition/boot strategy and should be independent of having TrustFence enabled or not.
https://www.digi.com/support/knowledge-base/does-cc8m-nano-support-dualboot-trustfence-(yocto)
Sep 12, 2023
Does Micro SIM work on CC8X SBC Pro board?
Yes, Digi confirms that the SIM socket on the SBC Pro works fine. You need to use a PCIe modem.Digi supported several PCIe modems but because this was third party hardware and every modem had their...
https://www.digi.com/support/knowledge-base/does-micro-sim-work-on-cc8x-sbc-pro-board
Sep 11, 2023
Provisioning Application - LoRaWAN Devices/Gateways
IntroductionProvisioning Application is used to provision devices/gateways between accounts. Devices/Gateways should be the first factory provisioned and they will be added to the database. Only de...
https://www.digi.com/support/knowledge-base/provisioning-application-lorawan-devices-gateways
Jul 01, 2021
Accessing Digi's FTP Site
Digi FTP site allows customer to download files such as firmware, documentation, tools etc. This is particulary useful for downloading older firmware versions which are not linked directly on the s...
https://www.digi.com/support/knowledge-base/accessing-digi-ftp-site
Sep 07, 2020
Digi International Security Notice - TRECK TCP/IP Stack "RIPPLE20" VU#257161 ICS-VU-035787
Digi International Security Notice TRECK TCP/IP Stack "RIPPLE20" VU#257161 ICS-VU-035787June 16th, 2020  The following CVE’s have been assigned to these vulnerabilities:CVE...
https://www.digi.com/support/knowledge-base/digi-international-security-notice-treck-tcp-ip-st
Jun 16, 2020
Digi 3rd Party Chinese Radios
Question: Has Digi in the past, or currently, used any components purchased from the following companies? •    Huawei •    ZTE Corp •   &n...
https://www.digi.com/support/knowledge-base/3rd-party-components-used
Oct 21, 2019
Unique Default Passwords for Digi Products (SB-327)
BackgroundAs of January 1, 2020, the California Consumer Privacy Act SB-327 requires all cellular and internet connected devices manufactured after that date to have unique default passwo...
https://www.digi.com/support/knowledge-base/unique-default-passwords-for-digi-products
Oct 16, 2019
Why am I getting “Writing chunk...[Error]:” when I try to update Yocto rootfs image on to CC6 SBC
The problem is that CC6 SBC partition size is smaller than the rootfs image you are trying to fit in to it.Please resize partition from u-boot and then try again.For more details look here:https://...
https://www.digi.com/support/knowledge-base/why-am-i-getting-writing-chunk-error-”-when-i
Sep 06, 2019
How to get the Android source code for ConnectCore 6
Customers can get the android sources by filling the form at the below link, once submit the form, A Digi representative will contact you to provide instructions on downloading the Digi Embedded fo...
https://www.digi.com/support/knowledge-base/how-to-get-the-android-source-code-for-connect-(1)
Sep 05, 2019
SACK Vulnerability Patch Status
SACK Vulnerability Patch Status for affected Digi products  Product Family/ProductVersion fix is included inEstimated Release DateCellularDigi IX1419.8Aug, 2019Digi EX1519.8Aug, 2019Digi LR54...
https://www.digi.com/support/knowledge-base/sack-vulnerability-patch-status
Jul 16, 2019
XBee Cellular Antennas
 For optimal performance with the XBee Cellular module, the antennas should be placed perpendicular to each other and not touching.   For parallel placement, Digi recommends to ...
https://www.digi.com/support/knowledge-base/xbee-cellular-antennas
Oct 10, 2017
How to find out the date code and manufacturing location information of Digi Products.
Depending on the location the units are built effects the orientation, linked below is the date code from USA or Thailand. The date code is 4 digits, 2 digit year and 2 digit week (YYWW) so in thes...
https://www.digi.com/support/knowledge-base/how-to-find-out-the-date-code-and-manufacturing-lo
Jul 06, 2017
DTE vs. DCE
Digi makes many serial devices, some of which are DTE (PortServer TS, EtherLite, Connect/ConnectPort, Digi One, USB-to-serial), and others which are DCE (TransPort, PKG RF modems, XBIB interface bo...
https://www.digi.com/support/knowledge-base/dte-vs-dce
Jul 06, 2017
What does "Galvanically isolated from Earth ground" mean?
"Galvanically isolated" is a term used to describe the relation between two different points in a circuit. It means that the ASYNC Signal Ground (SG) is isolated from earth ground, ...
https://www.digi.com/support/knowledge-base/what-does-galvanically-isolated-from-earth-ground
Jul 06, 2017
General Certification Comments on Digi products
Check the main reference manual for the given Digi product.  Generally they have a section marked 'Certification'.  If the certification in question is not seen there it is most l...
https://www.digi.com/support/knowledge-base/general-certification-comments-on-digi-products
Jul 06, 2017
Digi International Security Notice Vulnerability "GHOST"
 Digi International Security NoticeOriginally issued March 6th, 2015, updated December 18, 2015  CVE-2015-0235OverviewA critical security vulnerability, reported as CVE-2015-0235, nickna...
https://www.digi.com/support/knowledge-base/digi-international-security-notice-vulnerability-g
Jul 06, 2017
HOW TO: Find Country of Origin (CoO) for Digi-manufactured products
It is Digi's goal to facilitate and expedite worldwide trade in the most effective and efficient manner, by proactively observing all international rules and regulations regarding export. To a...
https://www.digi.com/support/knowledge-base/how-to-find-country-of-origin-coo-for-digi-manufac
Jul 06, 2017